- If you find a qualifying lower price online, call 1-866-859-0896 and provide a customer service agent the web site with the lower price.
- On qualifying products, AVLeaderz will verify the current price to complete the price match.
Alpine KTA-30FW, 4-Channel Tough Power PackWeather ResistantAmplifier - 300W
Not Available for Shipping Outside of the United States
Get Your Alpine Gear Here and Get it Installed at Your Local Authorized Alpine Dealer
Questions? We're here to help
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30FW is perfect for when you want to boost your sound system but dont have the space for a large amplifier. It is compatible with an aftermarket or factory head unit and adds up to 4 times the power over the head unit's original built-in power.
DYNAMIC PEAK POWER
The KTA-30FW features Alpines exclusive Dynamic Peak Power (DPP) technology which uses a new dynamic power supply design that delivers bursts of power during rigorous musical passages. When the amplifier senses that more power is required, the power supply quickly increases the internal gain level, effectively doubling the power for a significant increase in dynamic range at high music volumes.
WEATHER RESISTANT FORMAT
The KTA-30FW is ready for your adventures. It is weather resistant, rated at IP66 for protection again dust ingress and high-pressure water spray. The KTA-30FW features a rugged chassis and high-quality waterproof connector so it can be used in installations where it will be exposed to the elements, like side-by-sides, boats, open-top vehicles. and motorcycles.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS.
The KTA-30FW measures just 9-3/16 (W) x 1-5/8 (H) x 3-3/4 (D), so its small footprint lets it fit where most amplifiers wont. The KTA-30FW can be tucked away under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
| Weather Resistance | IP66 |
|
Number of Channels |
4 |
|
Class |
D |
|
Peak Power Rating (Watts) |
150 x 4 |
|
RMS Power Rating (Watts x Channels) - 4 Ohms |
75 x 4 |
|
RMS Power Rating (Watts x Channels) - 2 Ohms |
75 x 4 |
| RMS Power Rating - Bridged | N/A |
| Minimum Impedance Unbridged (Ohms) |
2 |
| Minimum Impedance Bridged (Ohms) |
N/A |
| THD at Rated RMS Power |
<1% |
| Bulit-in Crossover - Low Pass |
Yes |
| Built-in Crossover - High Pass |
Yes |
| High Pass Crossover Frequency (Hz) |
50-400hz |
| Low Pass Crossover Frequency (Hz) |
50-400hz |
| Signal-to-Noise Ratio |
82dB |
| Bass Boost |
No |
| Bass Remote Included |
No |
| Fuse Rating | 30A |
| CEA-2006 Compliant | Yes |
| Maximum Power Wire Gauge Size | 10 Gauge |
| Warranty | 1 Year |
| Weather Resistance | IP66 |
|
Number of Channels |
4 |
|
Class |
D |
|
Peak Power Rating (Watts) |
150 x 4 |
|
RMS Power Rating (Watts x Channels) - 4 Ohms |
75 x 4 |
|
RMS Power Rating (Watts x Channels) - 2 Ohms |
75 x 4 |
| RMS Power Rating - Bridged | N/A |
| Minimum Impedance Unbridged (Ohms) |
2 |
| Minimum Impedance Bridged (Ohms) |
N/A |
| THD at Rated RMS Power |
<1% |
| Bulit-in Crossover - Low Pass |
Yes |
| Built-in Crossover - High Pass |
Yes |
| High Pass Crossover Frequency (Hz) |
50-400hz |
| Low Pass Crossover Frequency (Hz) |
50-400hz |
| Signal-to-Noise Ratio |
82dB |
| Bass Boost |
No |
| Bass Remote Included |
No |
| Fuse Rating | 30A |
| CEA-2006 Compliant | Yes |
| Maximum Power Wire Gauge Size | 10 Gauge |
| Warranty | 1 Year |
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to