- If you find a qualifying lower price online, call 1-866-859-0896 and provide a customer service agent the web site with the lower price.
- On qualifying products, AVLeaderz will verify the current price to complete the price match.
Kicker KMA4506, KMA 6-Channel Weather- Resistant Full-Range Marine Amplifier (45KMA4506)
TOP TECH
Purpose-built for your boat, every KM amp comes complete with marine-grade speaker terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections.
TUNED
Dialing in your sound is easy with KM amps. Variable 12dB crossovers are built in, plus a 24dB subsonic filter is also included on the KMA600.1 mono amplifier, and Amp 3 of the KMA450.6. The amplifiers are also equipped with the KickEQ™ variable 12dB bass boost!
IN THE ZONE
KICKER created the KMA450.6 to power up to three independent full-range zones! This six-channel, 450-watt amp provides an easy way to get the perfect volume levels on (or off) the deck, in the water, or inside the cabin. Control the volume of one zone with the receiver. Another zone is controlled with the included full-range volume knob, which can be mounted on (or under) nearly any flat surface.
IN THE ZONE
With this KM Six-Channel Amp, your boat is a floating concert! Connect as many as 12 speakers in three independent zones to control the volume level on the tower speakers, and in the cabin or even the deck! A separate full-range level control connects to the amp for even more convenience. It’s truly one of the most versatile amps in marine audio.
This amp also features variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump, as well as a powerful 12dB crossover and 24dB subsonic filter, letting you quickly tune your system to perfection.
- Class-D Power Supply
- Six-Channel Amplifier With Bridging Capability
- Three-Zone Control
- Full-Range Volume Controller Included
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- 24dB Subsonic Filter (Amp 3 Only)
- KickEQ™ Variable 12dB Bass Boost
- ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
This KM-Series amplifier delivers as much as 75 watts into six channels, or 150 watts bridged into three channels. See below for more details.
|
| Weather Resistance | Conformal-Coated |
|
Number of Channels |
6 |
|
Class |
D |
|
Peak Power Rating (Watts) |
|
|
RMS Power Rating (Watts x Channels) - 4 Ohms |
40 x 4 |
|
RMS Power Rating (Watts x Channels) - 2 Ohms |
75 x 4 |
| RMS Power Rating - Bridged | 150 x 3 |
| Minimum Impedance Unbridged (Ohms) |
2 |
| Minimum Impedance Bridged (Ohms) |
4 |
| THD at Rated RMS Power |
1% |
| Bulit-in Crossover - Low Pass |
Yes |
| Built-in Crossover - High Pass |
Yes |
| High Pass Crossover Frequency (Hz) |
50-200Hz |
| Low Pass Crossover Frequency (Hz) |
50-200hz |
| Signal-to-Noise Ratio |
75dB |
| Bass Boost |
0-12dB @40Hz |
| Bass Remote Included |
No |
| Fuse Rating | 80A |
| CEA-2006 Compliant | |
| Maximum Power Wire Gauge Size | 4 Gauge |
| Warranty | 1 Year |
| Weather Resistance | Conformal-Coated |
|
Number of Channels |
6 |
|
Class |
D |
|
Peak Power Rating (Watts) |
|
|
RMS Power Rating (Watts x Channels) - 4 Ohms |
40 x 4 |
|
RMS Power Rating (Watts x Channels) - 2 Ohms |
75 x 4 |
| RMS Power Rating - Bridged | 150 x 3 |
| Minimum Impedance Unbridged (Ohms) |
2 |
| Minimum Impedance Bridged (Ohms) |
4 |
| THD at Rated RMS Power |
1% |
| Bulit-in Crossover - Low Pass |
Yes |
| Built-in Crossover - High Pass |
Yes |
| High Pass Crossover Frequency (Hz) |
50-200Hz |
| Low Pass Crossover Frequency (Hz) |
50-200hz |
| Signal-to-Noise Ratio |
75dB |
| Bass Boost |
0-12dB @40Hz |
| Bass Remote Included |
No |
| Fuse Rating | 80A |
| CEA-2006 Compliant | |
| Maximum Power Wire Gauge Size | 4 Gauge |
| Warranty | 1 Year |
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to