- If you find a qualifying lower price online, call 1-866-859-0896 and provide a customer service agent the web site with the lower price.
- On qualifying products, AVLeaderz will verify the current price to complete the price match.
Kicker KMA3604, KM Series 4 Channel Full Range Marine Amplifier - 360 Watts (48KMA3604)
TOP TECH
Purpose-built for your boat, every KM amp comes complete with marine-grade speaker terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections.
TUNED
Dialing in your sound is easy with KMA amps. Variable 12dB crossovers are built in, plus a 24dB subsonic filter is also included on the KMA800.1 mono amplifier, and Amp 3 of the KMA600.6. The amplifiers are also equipped with the KickEQ™ variable 6dB bass boost!
IN THE ZONE
KICKER created the KMA600.6 to power up to three independent full-range zones! This six-channel, 600-watt amp provides an easy way to get the perfect volume levels on (or off) the deck, in the water, or inside the cabin. Control the volume of one zone with the receiver.
FULL-RANGE FUN
Using Class A/B power, this amp features a variable bass boost with KickEQ™ giving you as much as 6dB of extra bump. A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
- Class A/B
- 500 Watts of Dynamic Power
- Four-Channel Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ™ Variable 6dB Bass Boost
- Real Marine™ ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
|
| Weather Resistance | Conformal-Coated |
|
Number of Channels |
4 |
|
Class |
A/B |
|
Peak Power Rating (Watts) |
|
|
RMS Power Rating (Watts x Channels) - 4 Ohms |
65 x 4 |
|
RMS Power Rating (Watts x Channels) - 2 Ohms |
90 x 4 |
| RMS Power Rating - Bridged | 180 x 2 |
| Minimum Impedance Unbridged (Ohms) |
2 |
| Minimum Impedance Bridged (Ohms) |
4 |
| THD at Rated RMS Power |
1% |
| Bulit-in Crossover - Low Pass |
Yes |
| Built-in Crossover - High Pass |
Yes |
| High Pass Crossover Frequency (Hz) |
50-200Hz |
| Low Pass Crossover Frequency (Hz) |
50-200hz |
| Signal-to-Noise Ratio |
75dB |
| Bass Boost |
0-12dB @40Hz |
| Bass Remote Included |
No |
| Fuse Rating | 80A |
| CEA-2006 Compliant | |
| Maximum Power Wire Gauge Size | 4 Gauge |
| Warranty | 1 Year |
| Weather Resistance | Conformal-Coated |
|
Number of Channels |
4 |
|
Class |
A/B |
|
Peak Power Rating (Watts) |
|
|
RMS Power Rating (Watts x Channels) - 4 Ohms |
65 x 4 |
|
RMS Power Rating (Watts x Channels) - 2 Ohms |
90 x 4 |
| RMS Power Rating - Bridged | 180 x 2 |
| Minimum Impedance Unbridged (Ohms) |
2 |
| Minimum Impedance Bridged (Ohms) |
4 |
| THD at Rated RMS Power |
1% |
| Bulit-in Crossover - Low Pass |
Yes |
| Built-in Crossover - High Pass |
Yes |
| High Pass Crossover Frequency (Hz) |
50-200Hz |
| Low Pass Crossover Frequency (Hz) |
50-200hz |
| Signal-to-Noise Ratio |
75dB |
| Bass Boost |
0-12dB @40Hz |
| Bass Remote Included |
No |
| Fuse Rating | 80A |
| CEA-2006 Compliant | |
| Maximum Power Wire Gauge Size | 4 Gauge |
| Warranty | 1 Year |
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to